Acoustic Floor 20

Acoustic Floor 20 system is designed to reduce transmission through timber floors in situations where finished floor height is critical.

Acoustic Floor 20 boards consist of a layer of 8mm reconstituted ACF (Acoustic Chip Foam) bonded to 12mm p5 moisture resistant chipboard.

When installed as part of a complete sound reduction system, it enables a timber floor to meet the sound transmission regulations of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 & 2015.

View more technical information and downloads

To be used over existing floorboards for conversions, refurbishments or most decoupled ceilings in new build projects.

Treated floor with:
Acoustic Floor 20
R,w+ Ctr
54dB
DnT,w+ Ctr
48dB
L’n,w
43dB
L’nT,w
48dB
Impact improvement 18dB ΔLw

Site results (in red) for Building Control approval.
Laboratory results (in blue) for comparison.

Overall size: 2400mm x 600mm x 20mm
Resilient layer thickness: 8mm
Resilient layer material: Reconstituted ACF (Acoustic Chip Foam)
Resilient layer fire test: Tested to BS 5852-2:1982
Weight: 11.8kg per sheet

Acoustic Floor 20 supplied by Isomass Ltd. Units 10 & 11, Avenue Business Park, Elsworth, Cambridgeshire CB23 4EY and installed in accordance with manufacturer’s instructions / recommendations.

Full installation instructions for Acoustic Floor 20 is available as a pdf to download. Go to the Downloads tab on this page.

Acoustic Floor 20 product data sheet

DOWNLOAD

Acoustic Floor 20 installation instructions

DOWNLOAD
  • Acoustic Floor 20 system on existing timber floor (subject to condition) or a new 18mm chipboard deck.
  • 200mm x 50mm timber joists@ max. 450mm centres.
  • 100mm 45kg/m3 insulation between joists.
  • Min. 20kg/m2 double boarded ceiling on resilient bars @400mm centres perpendicular to joist direction.
  • Acoustic flanking band reduces impact vibration leaking via structural walls and assists in reducing airborne sound paths.

Processing your enquiry...

For the fastest response to your enquiry,

please use the contact form options below.