Monodeck 32T & 37T

Acoustic floor system: direct to timber joists
The Monodeck 32T & 37T acoustic floor systems are designed to reduce impact sound transmission through a timber joisted floor where both the floorboards and the ceiling have been removed.

 

Monodeck 32T consists of a layer of 10mm reconstituted ACF (Acoustic Chip Foam) bonded to 22mm V313 P5 moisture resistant chipboard. Monodeck 37T consists of a layer of 15mm reconstituted ACF (Acoustic Chip Foam) bonded to 22mm V313 P5 moisture resistant chipboard.

 

When installed as part of an Isomass approved separating floor construction, it enables a timber floor to meet the sound transmission regulations of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.

View more technical information and downloads

To be used direct to joists for conversions, refurbishments, new build or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling.

  

Treated floor with:

Monodeck 32T

Monodeck 37T

R,w+ Ctr
DnT,w+ Ctr
L’n,w
L’nT,w
52dB
52dB
46dB
46dB
48dB
51dB
55dB
59dB

Site results (in red) for Building Control approval.
Laboratory results (in blue) for comparison.

Overall size: Monodeck 32T
Monodeck 37T
2400mm x 600mm x 32mm
2400mm x 600mm x 37mm
Resilient layer thickness: Monodeck 32T
Monodeck 37T
10mm
15mm
Resilient layer: High density reconstituted ACF (Acoustic Chip Foam)
Weight: Monodeck 32T
Monodeck 37T
22.8kg per sheet
23.5kg per sheet

Monodeck 32T or Monodeck 37T acoustic flooring, supplied by Isomass Ltd. Units 10 & 11, Avenue Business Park, Elsworth, Cambridgeshire CB23 4EY and installed in accordance with manufacturer’s instructions / recommendations.

Full installation instructions for Monodeck 32T and Monodeck 37T are available as a pdf to download. Go to the Downloads tab on this page.

  • Monodeck 32T system on 200mm x 70mm timber joists @ 450mm centres.
  • 100mm 45kg/m3insulation between joists.
  • 20kg/m2double boarded 25mm o/a plasterboard on resilient bars @ 400mm centres perpendicular to joist direction.
  • Acoustic flanking band reduces impact vibration leaking via structural walls and assists in reducing airborne sound paths.
  • Monodeck 37T system on 200mm x 70mm timber joists @ 450mm centres.
  • 100mm 45kg/m3insulation between joists.
  • Lath and plaster ceiling or 30mm o/a double boarded ceiling (min. 20kg/m2) fixed to timber joists.
  • Acoustic flanking band reduces impact vibration leaking via structural walls and assists in reducing airborne sound paths.
Monodeck 32T system section
Monodeck 37T system section
Isocheck 32T acoustic floor system
Monodeck 37T

Monodeck 32T Installation instructions

Monodeck 32T product data sheet

Monodeck 37T Installation instructions

Monodeck 37T product data sheet

Get in touch

Call us on 0845 838 33 99 or get in touch for more information