• Isomass Ltd – Incorporated 2006

Isocheck Isolation Strip

Isocheck Isolation Strip is ideal for upgrades when looking to increase impact sound insulation from foot fall noise on floors and reduce structure-borne noise from doors closing and light switches on stud walls.

Isocheck Isolation Strip has no adverse effect on the structural stability of the walls and its adhesive backing ensures it can be held in position as the work progresses.

The Isolating Strips are composed of cross linked Isopoli foam with a self adhesive layer on one side.

View more technical information and downloads

Isocheck Isolation Strips are designed to enhance impact sound insulation when used within all types of construction by isolating timber, steel and masonry separating and partition walls.

Common roll sizes*: 50mm wide x 5mm thick x 25m
75mm wide x 5mm thick x 25m
100mm wide x 5mm thick x 25m
50mm wide x 10mm thick x 10m
75mm wide x 10mm thick x 10m
100mm wide x 10mm thick x 10m
Composition: Cross linked Isopoli foam, self adhesive one side

* Many other sizes are available to order both in varying widths and thicknesses.

The blockwork isolation strip shall be Isocheck Isolation Strip, by Isomass Ltd. Units 10 & 11, Avenue Business Park, Elsworth, Cambridgeshire CB23 4EY and installed in accordance with manufacturer’s instructions / recommendations.

Installation direct to timber joists

  • Remove backing tape and bond Isolation Strip to the top of timber joists joints.
  • Apply Isocheck Flanking Band on the edges of the floorboards just before they are pushed against the perimeter walls to isolate the board from the wall.

Isocheck Isolation Strip product data sheet

DOWNLOAD

Installation direct to timber joists
Note: detail indicates how typically to enhance the impact performance in the floor of a domestic dwelling.

Isolating a steel separating or partition wall over a concrete floor
Note: detail indicates how typically to reduce structural noise in partition walls with Isocheck isolation tape.

Isolating a timber stud wall over a concrete/screed floor
Note: detail shown with Isocheck Shallow Batten floating floor system (left) and Isocheck Cradle floating floor system (right).

Isolating a timber stud wall over timber joists
Note: detail shown with Isocheck 37T or 32T floating floor system.

Isolating a separating or partition wall in a timber frame system
Note: detail indicates how typically to reduce structural noise in partition walls with Isocheck isolation tape.

Isolating a steel separating or partition wall over ­a timber floor
Note: detail indicates how typically to reduce structural noise in partition walls with Isocheck isolation tape.

Isolating a timber stud wall over timber floorboards
Note: detail shown with Isocheck 24T floating floor system (left) and Isocheck 15T floating floor system (right).

Isolating the edges of a timber or steel stud wall
Note: detail showing Isocheck Isolation Strip isolating the timber or steel stud wall. The isolation strip at the head of the stud wall is optional.

Processing your enquiry...

Contact us

Or call us on 0845 838 33 99