Acoustic Floor, Wall, Ceiling and Roof Products

Isocheck Cradle acoustic flooring system is designed to reduce impact sound transmission through uneven or cambered concrete floors by elevating the floor on timber battens that are supported by a pre-treated adjustable plastic cradle (otherwise referred to as an acoustic saddle).

Isocheck 27C, 23C, 18C & 14C acoustic floor systems are designed to reduce impact sound transmission through concrete floors.

Isocheck 28T, 24T, 18T & 15T are high-performance acoustic floor systems designed to reduce impact sound transmission through traditional timber floors.

The Isocheck 32T acoustic floor system is designed to reduce impact sound transmission through a timber joisted floor where both the floorboards and the ceiling have been removed.

The Isocheck 37T acoustic flooring system is designed to replace floorboards and reduce impact sound transmission through a timber joisted floor.

Isocheck RENOVO system is an overlay system, designed to reduce sound transmission through traditional joisted timber floors. It is suitable for historic buildings.

Isocheck PRIMO acoustic flooring systems are designed to reduce sound transmission through traditional / composite timber / steel joisted floors within new build and older lightweight frame constructions.

The Isocheck Deep Batten is a 18mm Isofiba or 15mm Isopoli bonded to a FSC certified 60mm softwood batten as standard. It is designed to reduce sound transmission through timber floors within a timber frame structure.

Isocheck Shallow Batten consists of a layer of 8mm Isopoli bonded to a FSC-certified softwood batten and is designed to reduce sound transmission through a level concrete structural sub-floor.

Isocheck weight-enhanced Barrier Mat acoustic flooring systems are primarily used to enhance the airborne sound.

The Isocheck Re-Mat impact improvement systems are designed to reduce impact sound transmission through concrete floor decks and can receive all types of floor finishes.

The Isocheck Re-Mat LVT impact improvement system is designed to reduce impact sound transmission through concrete and timber floor decks beneath a luxury vinyl tile and similar finishes.

The isocheck Re-Cork 3 and Re-Cork 5 systems are designed to reduce impact sound transmission through concrete floor decks. Re-Cork is suitable for a carpet flooring finish.

Isocheck Re-Mat high load Isolating Strips are designed to be installed beneath blockwork walls to isolate the wall from the concrete floor and reduce structure borne noise.

The Isocheck Screedcheck XL9 impact improvement system is designed to be placed within a masonry structural floor directly below the screed.

The Isocheck Re-Mat Base 3, 5, 6 & 10 under screed impact improvement systems are designed to reduce impact sound transmission through all types of concrete floors where a screed floor finish is also required.

Isocheck Impact Mat acoustic flooring systems are designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system.

Isocheck Resmat 6 is a recycled eco friendly underboard treatment to reduce sound transmission through traditional timber floors.

Isocheck Resmat 6 is a recycled eco friendly underboard treatment to reduce sound transmission through concrete floors.

Isocheck Isomat 7 is a low deflection underboard treatment to reduce sound transmission through traditional timber floors.

Isocheck weight-enhanced Barrier Mat acoustic flooring systems are primarily used to enhance the airborne sound.

Isocheck Impact Mat 300 acoustic flooring system is designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system.

The isocheck Underwood system is designed to be used under laminate and wood flooring. It is designed to provide resilience, durability and support to protect the floor covering against undue stress.

Isocheck Impact Mat 200 acoustic flooring system is designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system.

The Isocheck Re-Mat impact improvement systems are designed to reduce impact sound transmission through concrete floor decks and can receive all types of floor finishes.

The isocheck Re-Cork 3 and Re-Cork 5 systems are designed to reduce impact sound transmission through concrete floor decks. Re-Cork is suitable for a carpet flooring finish.

The Isocheck Re-Mat LVT impact improvement system is designed to reduce impact sound transmission through concrete and timber floor decks beneath a luxury vinyl tile and similar finishes.

The Isocheck Screedcheck XL9 impact improvement system is designed to be placed within a masonry structural floor directly below the screed.

The Isocheck Re-Mat Base 3, 6 & 10 under screed impact improvement systems are designed to reduce impact sound transmission through all types of concrete floors where a screed floor finish is also required.

The Isocheck ResiScreed 6, 8 & 10 systems are designed to reduce impact sound transmission through all types of structural concrete floors.

The Isocheck ReVerb Wall Panel systems are designed to absorb sound and reduce reverberation noise in areas with hard surfaces. The panels feature a high performance, lightweight (recycled) core wrapped in a preselected fabric.

Isocheck Isoblock & Isobar is a high performing sound reduction system designed to offer a more robust alternative to a standard resilient bar with similar low profile (space saving) features.

The Isowave 23 acoustic wall system is for the treatment of excessive flanking sound that bypasses a separating floor via lightweight structural walls.

The Isocheck Re-Mat M20 system is to reduce airborne sound transmission through all types of existing domestic party walls with a minimal loss of room space.

Designed to supplement insulation positioned within new and existing structures, Isoliner is particularly suited to refurbishment projects where external insulation, or invasive work to existing fabric, is undesirable.

The Isocheck ReVerb Ceiling Panel systems are designed to absorb sound and reduce reverberation noise in areas with hard surfaces. The panels feature a high performance, lightweight (recycled) core wrapped in a preselected fabric.

The Isocheck ReVerb Easy W ceiling tiles are designed to absorb sound and reduce reverberation noise.

Isocheck Isoblock & Isobar is a high performing sound reduction system designed to offer a more robust alternative to a standard resilient bar with similar low profile (space saving) features.

The Absorba ceiling and wall Panels feature a 65kg/m3 Glass wool ‘core’ around an MDF frame and then covered with a Polyolefin fabric. The fabric faced wall and ceiling panels absorb sound and reduce reverberation.

The Isowave 23 acoustic ceiling system is used to enhance a ceiling that is found to underperform or to provide a high performance ceiling commonly used in home cinemas/studios.

Designed to supplement insulation positioned within new and existing structures, Isoliner is particularly suited to refurbishment projects where external insulation, or invasive work to existing fabric, is undesirable. It can be used to line ceilings of pitched roofs and certain flat roofs.

Isocheck expandastrip is a permanently elastic foam, impregnated with chemically stabilised acrylic and backed with a self adhesive scrim tape. Expandastrip is ideal for joints between precast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork.

The isocheck high performance Acoustic Cavity Barrier is designed to maintain the acoustic separation potential of a partition wall by treating the voids beneath and above the partition.

Designed to supplement insulation positioned within new and existing structures, Isoliner is particularly suited to refurbishment projects where external insulation, or invasive work to existing fabric, is undesirable. It can be used to line ceilings of pitched roofs and certain flat roofs.

Isocheck weight-enhanced Barrier Mat acoustic flooring systems are primarily used to enhance the airborne sound.

Isocheck adjustable Cradle system is designed for inverted flat roof terraces.

Isocheck Quietroof is a self-adhesive acoustic mass loaded vinyl designed to significantly reduce rainfall noise on metal roof constructions and offer broadband sound absorption within a space.

For information on the solutions and systems we have available to enhance doors on your premises please get in touch.

Permanently elastic open cell polyurethane foam - used for joints between precast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. Also used as a primary or secondary seal in vertical and horizontal joints of building facades as well as metal painted cladding systems, window perimeter curtain walling and skylights.

For stud walls and steel & timber joists our Isocheck Isolation Strips are designed to enhance impact sound insulation when used within all types of construction by isolating timber, steel and masonry separating and partition walls. Commonly used for refurbishment upgrades, its adhesive backing ensures it can be held in position as the works progress.

Isocheck Isolation Washers are designed to isolate and separate mechanical fixings from the surrounding structure and reduce the transfer of noise and vibration. They are a simple, cost effective solution to the problem of vibration and noise transfer through mechanical components. Isocheck Isolation Washers are suitable for any application where mechanical fixings are required.

The Absorba ceiling and wall Panels feature a 65kg/m3 Glass wool ‘core’ around an MDF frame and then covered with a Polyolefin fabric. The fabric faced wall and ceiling panels absorb sound and reduce reverberation.

Isocheck flanking bands act as anti-noise gaskets between floating floor systems and structural elements. In this way, expansion is also catered for without the need for an air gap, where noise leakage may otherwise occur.

For use with both Isocheck and Monodeck tongued & grooved board joints. As a rule of thumb a 1 litre bottle (as illustrated) should cover approx 20m2 depending on the board size, ensuring glue is always applied to the top and bottom of the t&g joint.

Isocheck acoustic fire rated sealant is used to reduce the unwanted airborne sound that is commonly found to pass around the junction between ceilings and walls. Other common areas requiring attention are sealing around service penetrations in the Isomass floating floor system. Supplied in 310ml tubes.

Isocheck Impacta Pads are suitable for creating isolation of flanking noise elements, for example, where kitchen units are connected to walls. This common connection encourages impact/structure-borne sound transmission to travel from the units up/down the structural wall to the dwelling above/below. Other suitable locations may be under bath feet, etc.

Isocheck Re-Mat high load Isolating Strips are designed to be installed beneath blockwork walls to isolate the wall from the concrete floor and reduce structure borne noise.

The Monodeck 17T system is a layer of 8mm reconstituted ACF bonded to 9mm moisture resistant medium-density fibreboard. It is designed to reduce sound transmission through timber floors in situations where the finished floor height is critical.

The Monodeck 20T system is a layer of 8mm reconstituted ACF (Acoustic Chip Foam) bonded to 12mm p5 moisture resistant chipboard. It is designed to reduce sound transmission through timber floors in situations where the finished floor height is critical.

The Monodeck 26T system is a layer of 8mm reconstituted ACF bonded to 18mm P5 V313 moisture resistant chipboard. It is designed to reduce sound transmission through timber floors in situations where the finished floor height is critical.

The Monodeck 30T system is a layer of 8mm reconstituted ACF bonded to 22mm P5 V313 moisture resistant chipboard. It is designed to reduce sound transmission through timber floors in situations where the finished floor height is critical.

The Monodeck 32T system is a layer of 10mm reconstituted ACF bonded to 22mm P5 V313 moisture resistant chipboard. It is designed to replace floorboards and reduce sound transmission in timber floors.

The Monodeck 37T system is a layer of 15mm reconstituted ACF bonded to 22mm P5 V313 moisture resistant chipboard. It is designed to replace floorboards and reduce sound transmission in timber floors.

The Monodeck 26C system is a layer of 8mm reconstituted ACF bonded to 18mm P5 V313 moisture resistant chipboard. It is designed to reduce sound transmission and also reduce impact sound transmission through concrete floors.

Monodeck Mat 15 is a 15mm thick tri-layer system with a reconstituted 8mm ACF foam core which will provide impact and airborne improvement. It is designed to reduce airborne and impact sound transmission through timber or concrete floors.